Challenger garage door opener chain dog limit stop, P-1030, P1030, 160366, 1 pc

Description

This auction is for one
(1) Chain Dog or Limit Stop, which ever you prefer to call them.  They snap on the chain and trigger the open and close limits to signal the operator to stop. The manufacturers part number for the limit dog or stop is 160366, P1030 or P-1030.
A set of three (3) limit stops is required in a correct installation. There should be two mounted to stop the door on the up cycle and one mounted to stop the door on the down cycle. Consider spending a few dollars more and go to my auction for three (3) chain dogs or limit stops. Use the one you need and then save the other two for future use. Have them in reserve so you have no down time on your garage door opener the next time you need one.
Some models that these limit dogs were used in:
JG 850
1000
1300
1500
9100
9200
9300
9300M
9500
9500M
AC9300
AC9500
GLE
SE
These openers were manufactured by or for Amarr, Wayne-Dalton, JG Schmidt, Challenger, Allister, and Allstar.
Unfortunately I no longer have at auction a
Gear and Sprocket with bushing, chain drive gear for all models of Challenger openers.
Manufacturers part numbers include P1012, P-1012, and 220315. Without the bushing inserted the p/n was 109368. However, the Gear and Sprocket with bushing is a part of the gear cap assembly below.
Unfortunately I no longer have
the metal housing that holds the gear and sprocket in place. The manufacturers part number for the gear cap assembly is 220896.