Garage Door Torsion Springs .207 x 2 x 22 w/ or w/out Winding Bars

Description

Replacement part for garage door torsion spring. Includes
(1) One Pair of Coated Oil Tempered Garage Door Torsion Springs with wire size of .207 & Inside diameter of  2".
Please read the below information to help you measure torsion springs correctly & to ensure the accurate springs are ordered.
When you buy from us we include
(1) one Pair of Springs (1 Right Wound, and 1 Left Wound)
This listing also available below options from the dropdown List:
Replacement Center Bushing
Steel Center Bearing or Nylon Center Bearing
Winding Rods
Currents springs measurements:
Wire size is .207"
Inside Diameter is 2"
10,000 cycles (when measured and installed correctly)
Standard Cones already installed on the springs
(Additional Lengths are Available, Message Us for Quote)
Springs are Made of Oil Tempered USA Made Spring Steel, and are coated to resist rust, and for longer life
Technical and Installation Support is Available by Phone or Email.
How to select the correct spring (Please Read the Below Instructions Entirely Before Placing an Order)
IMPORTANT:
if the spring is not replaced with equal match in all measurement, it may not function correctly and cause damage to door or operator motor. Please message us before placing order if you have and questions or not sure if correctly identified all the measurements.
1.
Find your spring Wire Diameter.
Measure the length of the 10 coils with measurement tape. On below table locate wire size according your measured length of the 10 coils. To make sure your got wire size correctly you can measure 20 coils and locate wire size in table below table. If both measurements match you got right measurements. If not, try in different area of the spring. Make sure there is no gaps between wire to avoid incorrect measurements.
10-Coil Measurement
20-Coil Measurement
Wire Size
in
cm
in
cm
1 3/4"
4.5
3 1/2"
8.99
0.177
1 7/8"
4.76
3 3/4"
9.53
0.187
1 15/16"
4.88
3 7/8"
9.75
0.192
2"
5.08
4"
10.16
0.200
2 1/16"
5.26
4 1/8"
10.52
0.207
2 3/16"
5.55
4 3/8"
11.11
0.218
2 1/4"
5.72
4 1/2"
11.45
0.225
2 5/16"
5.95
4 5/8"
11.9
0.234
2 7/16"
6.19
4 7/8"
12.38
0.243
2 1/2"
6.35
5"
12.7
0.250
2 5/8"
6.67
5 1/4"
13.34
0.262
2 3/4"
6.93
5 1/2"
13.87
0.273
2 13/16"
7.19
5 5/8"
14.38
0.283
2.
Find your spring Inside Diameter
Simply measure inside diameter if your spring is broken. You can also measure outside diameter and deduct wire size x2. For this items outside diameter should be calculated below:
2.414 (Outside diameter) - (Wire Size) 0.207 x 2 (sides) = 2.000 (Inside Diameter)
Also most of the cones has a manufacture stampings which will help determine the ID (inside Diameter) P200 or P2000 will be stamped on the cones for a 2? ID (inside Diameter) and P175 for a 1 3/4" ID. The most common sizes in residential springs are 1 3/4" and 2" (Raynor doors use a 2 ¼? ID).
3.
Find your spring Length
To measure spring accurately make sure to take spring tension off to its unwind position. Otherwise measurements will be off by few inches.
If spring still in one piece:
Please make sure to measure to measure spring ?snake? only, DON?T include cones on both sides.
If spring broken in half or more
:
Measure each spring ?snake? piece only and add measurements together to get total length.
WE HAVE MANY OTHER REPAIR AND REPLACEMENT PARTS OF ALL BRANDS OF OVERHEAD GARAGE DOORS. SOME PARTS ARE IN PROCESS OF LISTING SO MESSAGE US IF YOU LOOKING FOR SOMETHING THAT WE HAVENT LISTED THOUGHT EBAY
CAUTION:
Installing or repairing a garage door can be dangerous task. Garage door springs and cables are under extreme tension and require appropriate safety precautions. Working with garage doors and
openers could result in personal injury or death. We recommend all installations, repairs, adjustments, and removals on garage doors be made by a qualified garage door technician. Any attempts to install, repair, replace, adjust garage doors or openers are done at your risk. In no event shall MY GARAGE DOOR PARTS be liable for damages of any kind, personal injury or death. User assumes all responsibility/risk for use of information and products purchased. By purchasing our products you agree to these terms.
RETURN POLICY
Returns are accepted within 30 days of the date that the item is received.
We don't offer exchanges. If a different item is needed, the item not needed can be returned and another item purchased.
Buyer is responsible to pay for the return shipping
If an item is listed with 'free shipping', a 20% restocking fee will be deducted from the refund amount.
All items MUST be returned in the same condition as they were when you received them. If an item is returned damaged or in any way visibly used, an additional deduction will be taken from the refund amount.