GTO SW2000XL Swing Gate Opener Residential Heavy Duty - Replaced with SW2000XLS

Description

GTO SW2000XL Swing Gate Opener Residential Operator Heavy Duty
GTO SW2000XL Swing Gate Opener Residential Operator Heavy Duty
GTO SW2000XL Swing Gate Opener - Replaced with the SW2000XLS
The
GTO SW2000XL
will operate a gate up to 16' long or weighing 500 lbs. (182 kg) each leaf; if all proper installation procedures have been followed. Ball bearing hinges should be used on all gates weighing over 250 lbs (113.4 kg).
Includes battery backup, radio receiver, entry transmitter, AC transformer, and all necessary mounting hardware for a post mounted installation, 10” (25.4 cm) total offset.
FEATURES
• Features
GTO SW2000XL
true soft start and stop operation. Open and close times from 15 seconds.
• Full systems capable, single/dual control board includes an adjustable obstruction sensing, gate sequencing and auto close settings.
• U.L. rated for Class I, II, III & IV. System certified to be in compliance with U.L. 325, 5th edition.
CONTROLS
• The
GTO SW2000XL
control board can be programmed for pull-to-open or push-to-open.
• Adjustable auto close, obstruction sensitivity and dual gate sequencing.
• One button auto-memorization of digital transmitter code.
• Charging regulated circuit on control board. “Sleep draw” is 20 mA; “active draw” is 2 to 7 amps.
• GTO / PRO remote-mounted 318 MHz RF receiver and one button transmitter included.
POWER
The
GTO PRO SW2000XL
system is powered by one 12 Volt DC / 7.0 amp hour, sealed, rechargeable battery (included). Battery
charge is maintained by a120V AC/60 Htz input and 18V AC at 40 VA. output transformer, rectified to 14V DC through control board.
OPTIONS:
Solar Panel Charger: float voltage 14.5 V DC output from a 19-3/8” (49.21 cm) x 15 1/4” (38.74 cm) silicon alloy panel.
Generates minimum of 10 watts at 600 mA. A gated diode on the control board prevents battery discharge. (FM123)
Payments & Returns Policy