JetEdge Model 36-50B High Pressure Water Blaster

Description

Nice JetEdge 36-50B including Hopper. Excellent condition out of a working environment.
36,000PSI
4035 Hours
Serial# 013547
50HP
460VAC / 60hz
3PH
59.3 FLA
Breaker: 100 amp
Manufacturers Date: 08-07-2000
Weight 3800 pounds
Physical Size
Length 80 in (203 cm)
Width 37 in (94 cm)
Height 52 in (132 cm)
Approximate Weight with Fluid 3,020 lbs. (1,370 kg)
Electric Motor
Motor Output: 50 hp (37 kw)
Motor Type: High Efficiency TEFC electric motor
Full load amps @ 460vac (60Hz): 60
Full load amps @ 230vac (60Hz): 120
Intensifier
Type: Single piston, dual plunger, reciprocating
Number of Intensifiers: One
Nominal Output Pressure 36,000 psi (2500 bar)
Intensification Ratio 12:1
Flow Rate 1.5 gpm (5.61 lpm)
Low-Pressure Water/Intensification Water
Type: Minimum potable tap water *Pretreated, <100 TDS, PH 6-8, Silica <15PPM
Supply Requirements Minimum 2 gpm @ 20 psi (1.4 bar )/ 75°F (24°C) Max.
Filtration
On board, 1 micron
Coolant Water
Maximum Temperature 70°F (21°C)
Minimum 0-4.0 gpm (0-15.1 lpm) @ Minimum 40 psi (3 bar)
Heat Load 37,000 B TU’s / Hour
Hydraulics
Reservoir Capacity 37 gallons (140 liters)
Filtration Full Flow 10 Micron
Environmental
Ambient Room Temperature 50° -100°F (10° -37°C)
Relative Humidity Noncondensing, Maximum 95% @ 100°F
Shipping is local pickup or we can quote shipping to your location.