-40%
Linear GD00Z-8 GD00Z-8-GC Z-Wave Garage Door Opener Remote Controller Accessory
$ 55.41
- Description
- Size Guide
Description
Linear / Nortek / GoControl GD00Z-8 GD00Z-8-GC Z-Wave Garage Door Opener Remote Controller AccessoryLinear GD00Z-8 GD00Z-8-GC Z-Wave Garage Door Opener Remote Controller Accessory
The GD00Z-8-GC Garage Door Opener Remote Controller opens or closes a sectional garage door remotely through a Z-Wave certified Gateway or Security Panel. It is compatible with virtually any automatic garage door opener connected to a sectional garage door. Installers only need to ‘pair’ the unit into the Gateway, mount the unit, connect two wires and plug it in. The GD00Z provides both audible and visual warnings prior to remotely-activated door movement, allowing it to meet UL 325-2010 safety requirements. The GD00Z ships with a wireless tilt sensor that attaches to the inside of the garage door, which reports ‘open’ or ‘closed’ status to the controller.
SPECIFICATIONS
• Power: 120VAC, 50/60 Hz
• Garage door position sensor frequency: 345 MHz
• Z-Wave Frequency: 908.42 MHz
Z-WAVE SPECIFICATIONS
• Range: Up to 130 feet between the wireless controller and/or the closest Z-Wave receiver module
• Network inclusion
• Scene: Command class
• S2 Security compatible
CERTIFICATIONS
• FCC
• ETL
INCLUDED ACCESSORIES
• Power supply 120VAC / 60Hz to 12VDC
• Garage door tilt sensor
• Mounting bracket and hardware
DIMENSIONS
• Controller - W x H x D (Inches): 6.94 x 1.38 x 5.0
• Tilt sensor - W x H x D (Inches): 1.69 x 0.88 x 1.19
The GoControl Z-Wave Plus Garage Door Controller, S2 Security adds Z-Wave remote control to most sectional garage door openers, allowing you to operate the opener through a Z-Wave controller, smartphone app, or an existing pushbutton. This new version of GoControl's garage door controllers features S2 encryption for more secure wireless communication and increased Z-Wave transmission range.
Adds Z-Wave control to a connected garage door opener
Works with almost any sectional garage door
Can be included in Z-Wave automation scenes and schedules
Included tilt sensor detects door's open/closed status
Customizable audio and visual alerts enhance safety
The Z-Wave Plus Garage Door Controller can emit audio and visual alerts to warn people nearby when the garage door is about to open/close. The included tilt sensor also sends status updates to inform you when the garage door is closed, open, or moving.
Installation Details
The Z-Wave Plus Garage Door Controller wires to your garage door opener and can be used in conjunction with an existing pushbutton. It mounts near the garage door opener either on the existing opener hardware with the included bracket, or directly to the wall with the included mounting hardware. The controller is powered by the included power supply, which plugs into a standard outlet.
The Garage Door Tilt Sensor mounts inside the top of your garage door using screws or double-sided tape. The sensor is powered by a pre-installed battery, and communicates wirelessly with the controller.
Z-Wave Plus Certification
Z-Wave Plus is an upgraded certification program to help you identify products that take advantage of the "Next Gen" Z-Wave hardware platform, also known as 500 Series or Gen5 Z-Wave. Z-Wave Plus certified solutions feature a selected set of extended features and capabilities that enhance your experience with faster and easier installation and setup. Z-Wave Plus advancements also provide longer battery life, faster operation, better wireless range and improved noise immunity.
Contents
Garage Door Remote Controller
Garage Door Tilt Sensor
Power Supply
Mounting Bracket and Hardware
Notes
Not compatible with garage door openers that use proprietary communications technology.
Requires enrollment into a Z-Wave controller (sold separately).
Z-Wave Compatible Automation Hubs
Payments & Returns Policy