Lot 2 Cherry 15A Limit Switches for Raynor Garage Doors MicroSwitch NO NC New

Description

2119A3G.10
New Cherry 15A Snap Action Rounded Lever Switches, Part Number 0E1334HD, or E13-34HD, or E1334HD.  Each bid quantity is for a Lot of Two (2) Switches.  You may bid / buy any number of lots, up to the total quantity available above.
These were purchased at an electronics auction earlier this year, and they were brand new in the original factory boxes.  We repackaged them in heavy ziplock bags for resale, and so they will ship fast and cheap.  Top quality switches from a great manufacturer.  These switches have three terminals for use with standard 1/4" quick connect terminals.  Not only that, but they can be wired either Normally Open (circuit is energized
when
lever is pressed) or Normally Closed (circuit is energized
until
lever is pressed.  Two terminals on one end are marked "NO" and "NC."  To change the operation, simply pull your connector off one terminal and slide it on the other.
Our guess is that these were a special order item for Raynor's high-end line of garage doors.  Similar switches are also frequently seen in packaging equipment (switch is mounted underneath a sheet metal counter, with the rounded tip of the lever protruding through a slot in the sheet metal).  Containers sliding across the lever tip will activate the switch.  Would also be ideal for end-of-stroke sensors and a zillion other uses.
According to the calipers
Overall length:  2.660"
Length (excluding lever and terminals):  1.843"
Overall width:  .645"
Overall height:  1.490"
Height (excluding lever):  .800"
Mounting holes:  1.000" on centers (OC) for #6 machine screws
According to the manufacturer
:
Specifications
UL1054 Rating: 15A, 125/250VAC; 3/4HP, 125VAC; 1-1/2HP, 250VAC; 2A 48VDC
Temperature Rating: 105°C
Flammability Rating: UL94HB
Materials
Case: General Purpose Phenolic
Actuating Button: Thermoplastic Nylon
Terminals: Brass
Moving Blade: Brass
Spring: Stainless Steel
Auxiliary Actuators: Cold-Rolled Steel
Contacts: Silver-Cadmium Oxide
Terminals: Standard 0.250" x 0.032" (6.35mm x 0.81mm)
Long life coil spring, snap action mechanism
Mounting
Recommended mounting screw: #6-32 round head
Recommended torque on screw: 6 inch-lbs. max.
CSA File Number: 16503
UL File Number: E23301