Red Domed 3D Letters fits TRD Skid Plate Tacoma 2016-2020 - 4Runner 2019-2020

Description

Something your car wants
Red Domed 3D Letters fits TRD Skid Plate Tacoma 2016-2019 / 4Runner 2019 Inserts
Domed 3D Letters
Domed letters are our premier level product. Using the latest technology, we have achieved the highest quality edge lines, sometimes called bubble style, they are bonded with acrilyc foam tape for the perfect grip. Weather and heat resistant, so you can be assured they will hold up for years.
We offer the fullest collection of letterings possible, period! Virtually any color and any style can be done. Located in New-York, we are operating our factory for over 15 years, that means experience, quality and speed.
​​​​​​​
WE ARE # 1 IN LETTERINGS
SIMPLE INSTALLATION
It will take minutes and can be maintained without any technical skills.
CAR WASH SAFE
We tested them for years against car washes, debris from road, dirt and grease.
WEATHER SAFE
Outstanding resistance to long-term exposure to sunlight and weathering. Will not crack or rust.
WILL LAST FOR YEARS
Authentic BDTrims product. Precisely laser cut for perfect fit and look.
Step 3:
N
e
e
d
d
i
f
f
e
r
e
n
t
c
o
l
o
r
o
r
s
t
y
l
e
?
We can make these letters in virtualy any color or style, check below for our most popular styles. You can include a note during checkout or simply contact us and we would process it in the color you need. We can make any custom patterns of your choise!
How to install
Step 1
Step 2
Without removing the red backing protective tape "dry-fit" ALL pieces, noting correct placement, joins and angles. Very Important Note:   ALL pieces should be checked "dry-fit" before proceeding.
Thoroughly clean the area where the pieces are to be applied with an rubbing alcohol to remove ALL residue and dirt. Let it dry.
Step 3
Remove red tape from the back and apply pieces. It is not recommended to install letters when it's cold, let pieces be at least room temperature.
Payment
FREE Shipping
Returns
We accept payment by any of the following methods:
PayPal
​​​​​​​
Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner!
Your order will be dispatched within
​​​​​​​
1-2 working days
of receiving payment (Monday-Friday)
In the very unlikely event that your item is lost or damaged during post, then we are responsible and will issue either
​​​​​​​a full refund or replacement.
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product
for up to 14 days
from the date you received it.
​​​​​​​
Any product you return must be in the same condition you received it and in the original packaging.
​​​​​​​
Legal Disclaimer:
Any names, symbols or descriptions used in our images and text are property of Toyota Motor Corporation, Ford Motor Company, General Motors, Nissan Motor Company or any other vehicle manufacturer, distributor or any affiliated companies thereof, and are used for identification and informational compatibility purposes only. It is neither inferred nor implied that any item sold by BDTrims is a product authorized by or in any way connected with Toyota Motor Corporation, Ford Motor Company, General Motors, Nissan Motor Company or any other vehicle manufacturer, distributor or any affiliated companies thereof.
See our other items
Letters by BDTrims are not paper thin vinyl! Made in USA by using laser cutting, our triple layer technology of Acrylic Foam Tape + ABS plastic + UV/Scratch resistant Coating will give you look & feel like no others! Installation Instructions: ---Step 1 --- ---Thoroughly clean the area where the pieces are to be applied with an rubbing alcohol to remove ALL residue and dirt. Let it dry. --- --- ---Step 2 --- ---Without removing the red backing protective tape “dry-fit” ALL pieces, noting correct placement, joins and angles. Very Important Note: ALL pieces should be checked "dry-fit" before proceeding to Step 3. Immediately stop installation procedure and contact us even if one piece doesn't fit. --- --- ---Step 3 --- ---Remove red tape from the back and apply pieces. It is not recommended to install letters when it’s cold, let pieces be room temperature.
BDTrims | Red Domed Letters fits TRD Skid Plate Tacoma 2016-2019 Inlay Inserts
Domed 3D Letters
Domed letters are our premier level product. Using the latest technology, we have achieved the highest quality edge lines, sometimes called bubble style, they are bonded with acrilyc foam tape for the perfect grip. Weather and heat resistant, so you can be assured they will hold up for years.
We offer the fullest collection of letterings possible, period! Virtually any color and any style can be done. Located in New-York, we are operating our factory for over 15 years, that means experience, quality and speed.
​​​​​​​
WE ARE # 1 IN LETTERINGS
WEATHER SAFE
Outstanding resistance to long-term exposure to sunlight and weathering. Will not crack or rust.
CAR WASH SAFE
We tested them for years against car washes, debris from road, dirt and grease.
SIMPLE INSTALLATION
It will take minutes and can be maintained without any technical skills.
WILL LAST FOR YEARS
Authentic BDTrims product. Precisely laser cut for perfect fit and look.
N
e
e
d
d
i
f
f
e
r
e
n
t
c
o
l
o
r
o
r
s
t
y
l
e
?
We can make these letters in virtualy any color or style, check below for our most popular styles. You can include a note during checkout or simply contact us and we would process it in the color you need. We can make any custom patterns of your choise!
How to install
Step 1
Without removing the red backing protective tape "dry-fit" ALL pieces, noting correct placement, joins and angles. Very Important Note:   ALL pieces should be checked "dry-fit" before proceeding.
Step 2
Thoroughly clean the area where the pieces are to be applied with an rubbing alcohol to remove ALL residue and dirt. Let it dry.
Step 3
Remove red tape from the back and apply pieces. It is not recommended to install letters when it's cold, let pieces be at least room temperature.
Legal Disclaimer:
Any names, symbols or descriptions used in our images and text are property of Toyota Motor Corporation, Ford Motor Company, General Motors, Nissan Motor Company or any other vehicle manufacturer, distributor or any affiliated companies thereof, and are used for identification and informational compatibility purposes only. It is neither inferred nor implied that any item sold by BDTrims is a product authorized by or in any way connected with Toyota Motor Corporation, Ford Motor Company, General Motors, Nissan Motor Company or any other vehicle manufacturer, distributor or any affiliated companies thereof.
Letters by BDTrims are not paper thin vinyl! Made in USA by using laser cutting, our triple layer technology of Acrylic Foam Tape + ABS plastic + UV/Scratch resistant Coating will give you look & feel like no others!
Installation Instructions:
Step 1
Thoroughly clean the area where the pieces are to be applied with an rubbing alcohol to remove ALL residue and dirt. Let it dry.
Step 2
Without removing the red backing protective tape “dry-fit” ALL pieces, noting correct placement, joins and angles. Very Important Note:   ALL pieces should be checked "dry-fit" before proceeding to Step 3. Immediately stop installation procedure and contact us even if one piece doesn't fit.
Step 3
Remove red tape from the back and apply pieces. It is not recommended to install letters when it’s cold, let pieces be room temperature.