Set of 4 - 83lb, 850cc High Impedance EV1 Fuel Injectors FLOW MATCHED SET

Description

List Price: 9.99
Sale Price: 9.99 - You save .00 on this set of 4 matched fuel injectors
Custom flow-matched set of high performance, 83lb/hr, 850cc/min fuel injectors
These injectors are part of our Asphalt Series of high performance, flow matched sets of fuel injectors
This set is high impedance (high resistance) - 12.5 Ohms
FIVEOMOTORSPORT FUEL INJECTORS are custom-manufactured in small-quantity batches to achieve the highest quality product.
Our injectors are all-fuels rated; including gasoline (MTBE), and E-85.
The finished injectors are then flowed and inscribed with a control number.
Data is recorded for each injector. The fuel injectors are then grouped into matched sets ready for shipping.
FLOW CHART: Each set is sold with a complete and unique flow-data chart indicating individual static flow rates at 3.0, 3.5, and 4.0 BAR.
As well as 3.0 BAR dynamic pulse testing for idle (15% duty-cycle) and 50% duty-cycle.
Along with a complete dead time off-set (latency) table. Flow matching was done with industry-standard equipment of the highest quality.
The tests were performed at varying temperatures to achieve realistic results.
Linear tuning with excellent low-end, and idle rpm.
Fiveo is the only fuel injector seller that can claim this level of technology.
SPECIAL NOTE TO OUR E85 USERS:
Ethanol based fuels tend to "dry" the fuel injector outlet orifices.
Users/tuners should be made aware that this may cause a "sticking" problem in fuel injectors that sit idle for a prolonged period of time.
It is suggested for applications running high ethanol content based fuels, to periodically incorporate into their fuel-system-maintenance a drop of light petroleum-based lubricant for each fuel injector.
This is also considered to be good maintenance, but not essential, for stainless steel based (Black-Ops Series) fuel injectors.
It should also be noted that for optimum performance the entire fuel system should be made up of ethanol approved materials including all fuel lines/fuel pump/fuel filter, etc.
Use for naturally aspirated and forced-air induction 4 cylinder engines.
Injector Body Design: Metal and composite plastic
Flow rates:
(These are true and tested flow rates of this individual set of fuel injectors).
We use Heptane as our testing agent.
83lbs/hr, 850cc/min at 43.5 psi (3 bar)
90lbs/hr, 950cc/min at 50 psi (3.5 bar)
96lbs/hr, 1015cc/min at 58psi (4 bar)
High resistance, no inline resistors or resistor box requires for use.
This fuel injector will function at rail pressures in excess of 101psi, 7 bar.
Will maintain linearity within 1%.
Excellent low pulse width response with predictable response down to 2ms.
Excellent atomization for modern multi-valve engines.
This set will require no more than a 1% trim for easy tuning.
Injector type: Saturated
Fuel Delivery: Single-hole Pintle
Electrical Connector: EV1, Jetronic
Spray angle: 25 degrees
Length: 3 inches, 74 mm
Body Diameter: 23 mm
Viton O-rings: Top and bottom, 14.5 mm
Resistance: 12.5 Ohms
Buy from a seller you can trust.
Buy from a proven eBay seller.
Fiveomotorsport has been a seller on eBay since 2000.
We are fuel injector experts - email with your questions.
All injector sets are sold with our 36 Months/Unlimited Miles Warranty.
Item Condition:
All of the Fiveomotorsport fuel injectors are shipped in brand-new condition unless otherwise stated as reconditioned or take-out injectors. All fuel injectors are covered by our warranty outlined below, unless otherwise stated.
Fiveo's Exclusive Warranty:
We stand behind all of our products with our 36 month/unlimited miles warranty. Within 14 days of your purchase date if you are not 100% satisfied, we will refund your purchase price for returned unused fuel injectors in their original packaging, minus shipping costs and up to a 15% restocking fee. If you ever have an injector go outside specification or fail for any reason when functioning within the stated operating conditions, we will replace it with a brand new fuel injector. You pay only the shipping costs. (Some racing applications may void this warranty).
Shipping and Handling Time:
All orders received by 2pm PST Monday-Friday will ship the same day. Orders received after 2pm on Friday will ship the following Monday. It is the buyer's responsibility to pay all customs fees, duties, import taxes, and related charges.
Average delivery times are listed below:
USPS priority mail – 3 business days
USPS Express International – 5 to 8 business days
FedEx Overnight
FedEx 2-Day